Developer Documentation
DataControlPlugin.cc
1 /*===========================================================================*\
2 * *
3 * OpenFlipper *
4  * Copyright (c) 2001-2015, RWTH-Aachen University *
5  * Department of Computer Graphics and Multimedia *
6  * All rights reserved. *
7  * www.openflipper.org *
8  * *
9  *---------------------------------------------------------------------------*
10  * This file is part of OpenFlipper. *
11  *---------------------------------------------------------------------------*
12  * *
13  * Redistribution and use in source and binary forms, with or without *
14  * modification, are permitted provided that the following conditions *
15  * are met: *
16  * *
17  * 1. Redistributions of source code must retain the above copyright notice, *
18  * this list of conditions and the following disclaimer. *
19  * *
20  * 2. Redistributions in binary form must reproduce the above copyright *
21  * notice, this list of conditions and the following disclaimer in the *
22  * documentation and/or other materials provided with the distribution. *
23  * *
24  * 3. Neither the name of the copyright holder nor the names of its *
25  * contributors may be used to endorse or promote products derived from *
26  * this software without specific prior written permission. *
27  * *
28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS *
29  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED *
30  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A *
31  * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER *
32  * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, *
33  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, *
34  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR *
35  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
36  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING *
37  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS *
38  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *
39 * *
40 \*===========================================================================*/
41 
42 
43 
44 #include "DataControlPlugin.hh"
45 
46 
47 #include <ACG/QtWidgets/QtMaterialDialog.hh>
48 
49 #include <queue>
50 
51 #include <ACG/Scenegraph/TranslationManipulatorNode.hh>
52 #include <ACG/Scenegraph/BoundingBoxNode.hh>
53 
54 //******************************************************************************
55 
56 const ACG::Vec4f base_color (0.0f,0.0f,0.5f,1.0f);
57 const ACG::Vec4f source_color (0.5f,0.0f,0.0f,1.0f);
58 const ACG::Vec4f target_color (0.0f,0.5f,0.2f,1.0f);
59 
60 //******************************************************************************
61 
62 
63 
65  tool_(0),
66  toolIcon_(0),
67  MeshDialogLayout_(0),
68  objectList_(0),
69  locked(false),
70  model_(0),
71  view_(0),
72  viewHeader_(0),
73  onlyDown_(0),
74  onlyUp_(0),
75  columnFromGUI_(-1),
76  headerPopupType_(0),
77  targetAction_(0),
78  sourceAction_(0),
79  removeAction_(0),
80  advancedSettingsBtn_(0)
81 {
82 
83 }
84 
85 
90 
91  //set the slot descriptions
93 
94  if ( ! OpenFlipper::Options::gui())
95  return;
96 
97  QMenu* contextMenu = new QMenu("Object");
98 
99  //Target Objects
100  QIcon icon = QIcon(OpenFlipper::Options::iconDirStr()+OpenFlipper::Options::dirSeparator()+"datacontrol-hide-object.png");
101  QAction* hideAction = new QAction(icon, tr("&Hide"), this);
102  hideAction->setStatusTip(tr("Hide object"));
103  connect(hideAction, SIGNAL(triggered()), this, SLOT(slotContextMenuHide()) );
104  contextMenu->addAction(hideAction);
105 
106  //Target Objects
107  icon = QIcon(OpenFlipper::Options::iconDirStr()+OpenFlipper::Options::dirSeparator()+"datacontrol-target-object.png");
108  targetAction_ = new QAction(icon, tr("&Target"), this);
109  targetAction_->setCheckable(true);
110  targetAction_->setStatusTip(tr("Set object as target"));
111  connect(targetAction_, SIGNAL(triggered()), this, SLOT(slotContextMenuTarget()) );
112  contextMenu->addAction(targetAction_);
113 
114  //Source Objects
115  icon = QIcon(OpenFlipper::Options::iconDirStr()+OpenFlipper::Options::dirSeparator()+"datacontrol-source-object.png");
116  sourceAction_ = new QAction(icon, tr("&Source"), this);
117  sourceAction_->setCheckable(true);
118  sourceAction_->setStatusTip(tr("Set object as source"));
119  connect(sourceAction_, SIGNAL(triggered()), this, SLOT(slotContextMenuSource()) );
120  contextMenu->addAction(sourceAction_);
121 
122  contextMenu->addSeparator();
123 
124  //Remove Objects
125  icon = QIcon(OpenFlipper::Options::iconDirStr()+OpenFlipper::Options::dirSeparator()+"datacontrol-delete-item.png");
126  removeAction_ = new QAction(icon, tr("&Remove"), this);
127  removeAction_->setCheckable(false);
128  removeAction_->setStatusTip(tr("Remove object"));
129  connect(removeAction_, SIGNAL(triggered()), this, SLOT(slotContextMenuRemove()) );
130  contextMenu->addAction(removeAction_);
131 
132  emit addContextMenuItem(contextMenu->menuAction() , DATA_ALL , CONTEXTOBJECTMENU);
133 
134  icon = QIcon(OpenFlipper::Options::iconDirStr()+OpenFlipper::Options::dirSeparator()+"datacontrol-material.png");
135  QAction* material = new QAction(icon, tr("Material Properties"), 0);
136  connect (material, SIGNAL( triggered() ), this, SLOT ( slotMaterialProperties() ));
137  emit addContextMenuItem(material , DATA_ALL , CONTEXTOBJECTMENU);
138 
139  icon = QIcon(OpenFlipper::Options::iconDirStr()+OpenFlipper::Options::dirSeparator()+"datacontrol-copyToTargets-material.png");
140  QAction* copyMaterial = new QAction(icon, tr("Copy Material Properties to Targeted Objects"), 0);
141  connect (copyMaterial, SIGNAL( triggered() ), this, SLOT ( slotCopyMaterialToTargeted() ));
142  emit addContextMenuItem(copyMaterial , DATA_ALL , CONTEXTOBJECTMENU);
143 
144  icon = QIcon(OpenFlipper::Options::iconDirStr()+OpenFlipper::Options::dirSeparator()+"datacontrol-copy-material.png");
145  QAction* copyMaterialToClipboard = new QAction(icon, tr("Copy Material Properties to Clipboard"), 0);
146  connect (copyMaterialToClipboard, SIGNAL( triggered() ), this, SLOT ( slotCopyMaterialToClipboard() ));
147  emit addContextMenuItem(copyMaterialToClipboard , DATA_ALL , CONTEXTOBJECTMENU);
148 
149  icon = QIcon(OpenFlipper::Options::iconDirStr()+OpenFlipper::Options::dirSeparator()+"datacontrol-paste-material.png");
150  QAction* pasteMaterialFromClipboard = new QAction(icon, tr("Paste Material Properties from Clipboard"), 0);
151  connect (pasteMaterialFromClipboard, SIGNAL( triggered() ), this, SLOT ( slotPasteMaterialFromClipboard() ));
152  emit addContextMenuItem(pasteMaterialFromClipboard , DATA_ALL , CONTEXTOBJECTMENU);
153 
156 
157  connect(tool_->lightSources, SIGNAL(toggled(bool)), this, SLOT(slotShowLightSources(bool)));
158  //update light visibility, if layout was changed
159  connect(model_, SIGNAL(layoutChanged ()), this, SLOT(slotShowLightSources()) );
160  connect(model_, SIGNAL(rowsRemoved(const QModelIndex& , int , int )), this, SLOT(slotShowLightSources()));
161 }
162 
163 
164 //******************************************************************************
165 
166 void DataControlPlugin::initializePlugin()
167 {
168  if ( ! OpenFlipper::Options::gui())
169  return;
170 
172  connect( tool_ , SIGNAL( keyEvent( QKeyEvent* ) ),
173  this , SLOT(slotKeyEvent ( QKeyEvent* ) ));
174  QSize size(300, 300);
175  tool_->resize(size);
176 
177  model_ = new TreeModel( );
178 
179  view_ = tool_->treeView;
180 
181  tool_->treeView->setModel(model_);
182 
183  view_->QTreeView::resizeColumnToContents(1);
184  view_->QTreeView::resizeColumnToContents(2);
185  view_->QTreeView::resizeColumnToContents(3);
186 
187 
188  connect( model_,SIGNAL(dataChangedInside(int,int,const QVariant&) ),
189  this, SLOT( slotDataChanged(int,int,const QVariant&)) );
190 
191  connect( model_,SIGNAL( moveBaseObject(int,int) ),
192  this, SLOT( slotMoveBaseObject(int,int) ) );
193 
194  connect( view_,SIGNAL(customContextMenuRequested ( const QPoint & ) ),
195  this,SLOT(slotCustomContextMenuRequested ( const QPoint & ) ));
196 
197  connect( tool_->notSelected, SIGNAL(toggled ( bool ) ),
198  this, SLOT (slotBoundingBoxChange ( ) ));
199  connect( tool_->sourceSelected, SIGNAL(toggled ( bool ) ),
200  this, SLOT (slotBoundingBoxChange ( ) ));
201  connect( tool_->targetSelected, SIGNAL(toggled ( bool ) ),
202  this, SLOT (slotBoundingBoxChange ( ) ));
203 
204  connect( this, SIGNAL(objectsGrouped(IdList)), this, SLOT(slotObjectsGrouped(IdList)),Qt::QueuedConnection);
205 
206  viewHeader_ = tool_->treeView->header();
207  viewHeader_->setContextMenuPolicy(Qt::CustomContextMenu);
208 
209  // connect the slot for the context menu
210  connect( viewHeader_, SIGNAL(customContextMenuRequested ( const QPoint & ) ),
211  this, SLOT(slotHeaderCustomContextMenuRequested ( const QPoint & ) ));
212 
213  toolIcon_ = new QIcon(OpenFlipper::Options::iconDirStr()+OpenFlipper::Options::dirSeparator()+"datacontrol-toolbox.png");
214 
215  QWidget *headerAreaWidget = new QWidget();
216  advancedSettingsBtn_ = new QToolButton();
217  advancedSettingsBtn_->setAutoRaise(true);
218  advancedSettingsBtn_->setIcon(QIcon(OpenFlipper::Options::iconDirStr()+OpenFlipper::Options::dirSeparator()+"preferences.png"));
219  advancedSettingsBtn_->setIconSize(QSize(16, 16));
220  advancedSettingsBtn_->setPopupMode(QToolButton::InstantPopup);
221  advancedSettingsBtn_->setToolTip(tr("Advanced Settings"));
222  QHBoxLayout *hl = new QHBoxLayout;
223  hl->addWidget(advancedSettingsBtn_);
224  hl->addStretch(1);
225  hl->setContentsMargins(8, 0, 0, 0);
226  headerAreaWidget->setLayout(hl);
227 
228  QMenu *menu = new QMenu();
229  menu->addAction(tool_->lightSources);
230  menu->addAction(tool_->notSelected);
231  menu->addAction(tool_->sourceSelected);
232  menu->addAction(tool_->targetSelected);
233  advancedSettingsBtn_->setMenu(menu);
234 
235  emit addToolbox("Data Control", tool_, toolIcon_, headerAreaWidget);
236 }
237 
238 //******************************************************************************
239 
244 {
245  // Get all selected rows
246  int selectedRows = _lst.size();
247 
248  //update each item
249  for(int i = 0 ; i < selectedRows ; ++i)
250  {
251  int id = _lst[i];
252  BaseObject* item = 0;
253 
254  if ( id != -1 && PluginFunctions::getObject(id,item) )
255  emit updatedObject(item->id(),UPDATE_ALL);
256  }
257 }
258 
259 //******************************************************************************
260 
265 {
266  if ( ! OpenFlipper::Options::gui())
267  return;
268 
269  BaseObjectData* obj = 0;
270 
271  if ( PluginFunctions::getObject( _identifier, obj) )
272  updateBoundingBox (obj);
273 
274  BaseObject* object = 0;
275  if ( !PluginFunctions::getObject( _identifier, object) )
276  return;
277 
278  //check for changes
279  int column = columnFromGUI_;//if GUI has set the column, use this information
280  if (column == -1)//otherwise, try to get the column
281  {
282  TreeItem* item = model_->getItem(_identifier);
283  if ( !item )
284  return;
285 
286  if (item->source() != object->source())
287  column = 2;
288  else if (item->target() != object->target())
289  column = 3;
290  else
291  return;//could not decide, which column needs a update, discard
292  }
293 
294 
295  model_->objectChanged( _identifier );
296 
297  //block scenegraph reset and redraw in core
298  OpenFlipper::Options::blockSceneGraphUpdates();
299  OpenFlipper::Options::redrawDisabled(true);
300 
301  // if we are allowed to propagate down
302  if ( onlyUp_ == 0 ){
303 
304  onlyDown_++;
305 
306  if ( object->isGroup() )
307  propagateDownwards(object, column); // 2: source 3: target
308 
309  onlyDown_--;
310  }
311 
312  // if we are allowed to propagate up
313  if ( onlyDown_ == 0 ){
314 
315  onlyUp_++;
316 
317  propagateUpwards(object->parent(), column); // 2: source 3: target
318 
319  onlyUp_--;
320  }
321 
322  OpenFlipper::Options::unblockSceneGraphUpdates();
323  OpenFlipper::Options::redrawDisabled(false);
324  emit updateView();
325 }
326 
327 
328 //******************************************************************************
329 
335 
336  if ( ! OpenFlipper::Options::gui())
337  return;
338 
339  // if onlyUp_ > 0 --> _identifier is a group and the selection
340  // does not have to be applied
341  if (onlyUp_ == 0){
342  //inform the model
343  model_->objectChanged( _identifier );
344  }
345 
346  //check for changes in the tree
347  BaseObject* obj = 0;
348 
349  //block scenegraph reset and redraw in core
350  OpenFlipper::Options::blockSceneGraphUpdates();
351  OpenFlipper::Options::redrawDisabled(true);
352 
353  if ( PluginFunctions::getObject( _identifier, obj) ){
354 
355  // if we are allowed to propagate up
356  if ( onlyDown_ == 0 ){
357 
358  onlyUp_++;
359 
360  propagateUpwards(obj->parent(), 1); // 1 = visibilty
361 
362  onlyUp_--;
363 
364  }
365 
366  // if we are allowed to propagate down
367  if ( onlyUp_ == 0 ){
368 
369  onlyDown_++;
370 
371  if ( obj->isGroup() )
372  propagateDownwards(obj, 1); // 1 = visibilty
373 
374  onlyDown_--;
375  }
376  }
377 
378  OpenFlipper::Options::unblockSceneGraphUpdates();
379  OpenFlipper::Options::redrawDisabled(false);
380 
381  BaseObjectData* object = 0;
382 
383  if ( PluginFunctions::getObject( _identifier, object) )
384  updateBoundingBox (object);
385 
386  emit updateView();
387 
388 }
389 
390 
391 //******************************************************************************
392 
398 
399  if ( ! OpenFlipper::Options::gui())
400  return;
401 
402  model_->objectChanged( _identifier );
403 }
404 
405 
406 //******************************************************************************
407 
413 
414  if ( ! OpenFlipper::Options::gui())
415  return;
416 
417  BaseObject* obj = 0;
418 
419  if ( PluginFunctions::getObject(_id, obj) ) {
420  model_->objectAdded(obj);
421 
422  // Only if the added object was a light source, we will traverse the objects!
423  if ( obj->dataType() == DATA_LIGHT)
424  slotShowLightSources(tool_->lightSources->isChecked());
425 
426  view_->resizeColumnToContents(0);
427  }
428 }
429 
430 
431 //******************************************************************************
432 
438  fileOpened(_id);
439 }
440 
441 //******************************************************************************
442 
448 
449  if ( ! OpenFlipper::Options::gui())
450  return;
451 
452  model_->objectDeleted(_id);
453 }
454 
455 //******************************************************************************
456 
461 void DataControlPlugin::slotKeyEvent( QKeyEvent* _event )
462 {
463 
464  if ( _event->modifiers() == Qt::ControlModifier ) {
465  switch (_event->key()) {
466  case Qt::Key_A :
467  setAllTarget();
468  return;
469  default:
470  return;
471  }
472  }
473 
474  switch (_event->key()) {
475  case Qt::Key_Delete :
476  slotPopupRemove();
477  return;
478  default:
479  return;
480  }
481 
482 }
483 
484 
485 //******************************************************************************
486 
493 void DataControlPlugin::slotDataChanged ( int _id, int _column, const QVariant& _value)
494 {
495 
496  //get the corresponding baseObject
497  BaseObject* obj = 0;
498  if ( !PluginFunctions::getObject( _id, obj) )
499  return;
500 
501  switch ( _column ) {
502  // Name
503  case 0:
504  obj->setName( _value.toString() );
505  break;
506 
507  // show/hide
508  case 1:
509  obj->visible( _value.toBool() );
510  break;
511 
512  // source
513  case 2:
514  columnFromGUI_ = 2;//set information, which information will be changed
515  obj->source( _value.toBool() );
516  columnFromGUI_ = -1;
517  break;
518 
519  // target
520  case 3:
521  columnFromGUI_ = 3;//set information, which information will be changed
522  obj->target( _value.toBool() );
523  columnFromGUI_ = -1;
524  break;
525 
526  default:
527  break;
528  }
529 }
530 
531 
532 //******************************************************************************
533 
539 void DataControlPlugin::slotMoveBaseObject(int _id, int _newParentId){
540 
541  BaseObject* obj = 0;
542 
543  if ( !PluginFunctions::getObject(_id, obj) )
544  return;
545 
546  BaseObject* parent = 0;
547 
548  if ( !PluginFunctions::getObject(_newParentId, parent) )
549  return;
550 
551  BaseObject* oldParent = obj->parent();
552 
553  //set new parent
554  obj->setParent( parent );
555 
556  //if oldParent is an empty group -> delete it
557  if ( oldParent != PluginFunctions::objectRoot() && oldParent->childCount() == 0 )
558  emit deleteObject( oldParent->id() );
559 }
560 
561 
562 //******************************************************************************
563 
565 
566  int rows = model_->rowCount();
567 
568  for(int i = 0; i < rows; ++i) {
569  TreeItem* item = model_->getItem(model_->index(i,0));
570  if(item->dataType() == DATA_LIGHT) {
571  view_->setRowHidden(i, model_->parent(model_->index(i,0)), !_state);
572  }else{
573  //always show, if it is not a light
574  view_->setRowHidden(i, model_->parent(model_->index(i,0)), false);
575  }
576  }
577 }
578 
579 
581 {
582  slotShowLightSources( tool_->lightSources->isChecked() );
583 }
584 //******************************************************************************
585 
591 
592  if ( _ini.section_exists( "BoundingBox" ) && OpenFlipper::Options::gui() )
593  {
594  bool value;
595  if (_ini.get_entry(value, "BoundingBox","notSelected"))
596  tool_->notSelected->setChecked (value);
597  if (_ini.get_entry(value, "BoundingBox","sourceSelected"))
598  tool_->sourceSelected->setChecked (value);
599  if (_ini.get_entry(value, "BoundingBox","targetSelected"))
600  tool_->targetSelected->setChecked (value);
601  }
602 
603  if ( !_ini.section_exists( "Groups" ) )
604  return;
605 
606  // Names of all groups
607  QStringList groupNames;
608 
609  // names of the primary groups
610  QStringList rootGroup;
611 
612  // Get the list of group names to the file
613  _ini.get_entry(groupNames,"Groups","groups");
614 
615  // Get the primary group names to the file
616  _ini.get_entry(rootGroup,"Groups","rootGroup");
617 
618  //list of groups
619  QVector< BaseObject* > groups;
620 
621  // Go over one level of the groups
622  while ( rootGroup.size() > 0 ) {
623  QString current = rootGroup[0];
624  rootGroup.removeFirst();
625 
626  QStringList groupChildren;
627  QStringList elementChildren;
628 
629  _ini.get_entry(elementChildren ,current,"children");
630  _ini.get_entry(groupChildren ,current,"subgroups");
631 
632  // if we get a parent item, scan the tree for it or use the root node otherwise
633  BaseObject* parentItem;
634  QString parentName;
635  if ( _ini.get_entry(parentName,current,"parent") ) {
636  parentItem = PluginFunctions::objectRoot()->childExists(parentName);
637  if ( parentItem == 0 )
638  parentItem = PluginFunctions::objectRoot();
639  } else
640  parentItem = PluginFunctions::objectRoot();
641 
642  rootGroup << groupChildren;
643 
644  // check if this group already exists
645  BaseObject* group = PluginFunctions::objectRoot()->childExists( current );
646 
647  // group does not exist
648  if ( !group ) {
649 
650  int groupId = addEmptyGroup(current, parentItem->id());
651  PluginFunctions::getObject(groupId, group);
652 
653  // in the groups vector we only need the lowest groups
654  // because they are used recursively
655  int p = groups.indexOf( group->parent() );
656  if ( p > -1 )
657  groups.remove( p );
658 
659  groups.push_back( group );
660  }
661 
662  // process children
663  for ( int i = 0 ; i < elementChildren.size() ; ++i ) {
664  BaseObject* childItem = PluginFunctions::objectRoot()->childExists( elementChildren[i] );
665  if ( childItem ) {
666  childItem->setParent(group);
667  }
668  }
669  }
670 }
671 
672 
673 //******************************************************************************
674 
680 
681  std::queue< BaseObject* > children;
682  children.push( PluginFunctions::objectRoot() );
683 
684  std::vector< BaseObject* > groups;
685 
686  // Get all groups from the tree
687  while ( ! children.empty() ) {
688  BaseObject* item = children.front();
689  children.pop();
690 
691  for ( int i = 0 ; i < item->childCount(); ++i )
692  if ( item->child(i)->dataType(DATA_GROUP))
693  children.push( item->child(i) );
694 
695  if ( item->dataType(DATA_GROUP) && (item != PluginFunctions::objectRoot() ) )
696  groups.push_back(item);
697  }
698 
699  // Names of all groups
700  QStringList groupNames;
701 
702  // names of the primary groups
703  QStringList rootGroup;
704 
705  for ( uint i = 0 ; i < groups.size() ; ++i ) {
706  groupNames.push_back( groups[i]->name() );
707 
708  _ini.add_entry(groups[i]->name(),"groupname",groups[i]->name());
709 
710  // write the name of the parent
711  if ( ( groups[i]->parent() != 0 ) && ( groups[i]->parent() != PluginFunctions::objectRoot() ) )
712  _ini.add_entry(groups[i]->name(),"parent",groups[i]->parent()->name());
713 
714  if ( groups[i]->parent() == PluginFunctions::objectRoot() )
715  rootGroup.push_back( groups[i]->name() );
716 
717  // Write a list of this groups children
718  QStringList groupchildren;
719  QStringList elementchildren;
720  for ( int j = 0 ; j < groups[i]->childCount(); ++j ) {
721  if ( groups[i]->child(j)->dataType(DATA_GROUP) )
722  groupchildren.push_back( groups[i]->child(j)->name() );
723  else
724  elementchildren.push_back( groups[i]->child(j)->name() );
725  }
726 
727  _ini.add_entry(groups[i]->name(),"subgroups",groupchildren);
728  _ini.add_entry(groups[i]->name(),"children",elementchildren);
729  }
730 
731  // Write the list of group names to the file
732  _ini.add_entry("Groups","groups",groupNames);
733 
734  // Write the primary group names to the file
735  _ini.add_entry("Groups","rootGroup",rootGroup);
736 
737  if ( OpenFlipper::Options::gui() ) {
738 
739  _ini.add_entry("BoundingBox","notSelected",tool_->notSelected->isChecked ());
740  _ini.add_entry("BoundingBox","sourceSelected",tool_->sourceSelected->isChecked ());
741  _ini.add_entry("BoundingBox","targetSelected",tool_->targetSelected->isChecked ());
742  }
743 
744 }
745 
746 
747 //******************************************************************************
748 
755 
756 
757  if ( _obj == PluginFunctions::objectRoot() || (!_obj->isGroup()) )
758  return;
759 
760  QList< BaseObject* > children = _obj->getLeafs();
761  bool changed = false;
762  bool value = false;
763 
764 
765  switch ( _column ){
766 
767  case 1: //VISIBILTY
768 
769  for (int i=0; i < children.size(); i++)
770  value |= children[i]->visible();
771 
772  _obj->visible( value );
773 
774  changed = true;
775 
776  break;
777 
778  case 2: //SOURCE
779 
780  for (int i=0; i < children.size(); i++){
781  value |= children[i]->source();
782  }
783 
784  if (_obj->source() != value){
785  _obj->source( value );
786  changed = true;
787  }
788  break;
789 
790  case 3: //TARGET
791 
792  for (int i=0; i < children.size(); i++){
793  value |= children[i]->target();
794  }
795 
796  if (_obj->target() != value){
797  _obj->target( value );
798  changed = true;
799  }
800 
801  break;
802 
803  default:
804  break;
805  }
806 
807  if ( changed )
808  propagateUpwards( _obj->parent(), _column );
809 }
810 
811 //******************************************************************************
812 
819 
820  for (int i=0; i < _obj->childCount(); i++){
821 
822  BaseObject* current = _obj->child(i);
823 
824  switch ( _column ){
825 
826  case 1: //VISIBILTY
827 
828  if ( current->visible() != _obj->visible() ){
829 
830  current->visible( _obj->visible() );
831  }
832  break;
833 
834  case 2: //SOURCE
835 
836  if ( current->source() != _obj->source() ){
837  current->source( _obj->source() );
838  }
839  break;
840 
841  case 3: //TARGET
842 
843  if ( current->target() != _obj->target() ){
844  current->target( _obj->target() );
845  }
846 
847  break;
848 
849  default:
850  break;
851  }
852 
853  if ( current->isGroup() ){
854  propagateDownwards(current, _column);
855 
856  }
857  }
858 }
859 
860 //******************************************************************************
861 
865 {
866  for (PluginFunctions::ObjectIterator o_it; o_it != PluginFunctions::objectsEnd(); ++o_it) {
867  updateBoundingBox (o_it);
868  }
869 
870  emit updateView();
871 }
872 
873 //******************************************************************************
874 
880 {
881  if (tool_->notSelected->isChecked () ||
882  (_obj->source () && tool_->sourceSelected->isChecked ()) ||
883  (_obj->target () && tool_->targetSelected->isChecked ()))
884  {
886 
887  ACG::Vec4f color = base_color;
888 
889  if (_obj->source () && tool_->sourceSelected->isChecked ())
890  color += source_color;
891 
892  if (_obj->target () && tool_->targetSelected->isChecked ())
893  color += target_color;
894 
895  _obj->boundingBoxNode()->set_base_color (color);
896  }
897  else
899 
900 }
901 
902 //******************************************************************************
908  _ini.add_entry("BoundingBox","notSelected",tool_->notSelected->isChecked ());
909  _ini.add_entry("BoundingBox","sourceSelected",tool_->sourceSelected->isChecked ());
910  _ini.add_entry("BoundingBox","targetSelected",tool_->targetSelected->isChecked ());
911 }
912 
915  advancedSettingsBtn_->setVisible(reduced);
916 }
917 
918 void DataControlPlugin::slotObjectUpdated( int _identifier, const UpdateType& _type )
919 {
920  if ( ! OpenFlipper::Options::gui() || !_type.contains(UPDATE_GEOMETRY))
921  return;
922 
923  BaseObjectData* obj = 0;
924 
925  if ( PluginFunctions::getObject( _identifier, obj) )
926  {
927  updateBoundingBox (obj);
928  model_->objectChanged(obj->id());
929  }
930 }
931 
932 
void slotKeyEvent(QKeyEvent *_event)
a key event occurred
DataType dataType()
dataType
Definition: TreeItem.cc:94
void slotVisibilityChanged(int _identifier)
Update the model if the visibility of an object changed.
void propagateUpwards(BaseObject *_obj, int _column)
Recursively update a column up to the root of the tree.
void saveIniFileOptions(INIFile &_ini)
Save groups to ini file.
QList< BaseObject *> getLeafs()
get all leafes of the tree below this object ( These will be all visible objects ) ...
Definition: BaseObject.cc:567
const UpdateType UPDATE_GEOMETRY(UpdateTypeSet(1)<< 2)
Geometry updated.
BaseObject * child(int row)
return a child
Definition: BaseObject.cc:506
void slotBoundingBoxChange()
Bounding box selection changed.
bool target()
target
Definition: TreeItem.cc:127
bool source()
Definition: BaseObject.cc:291
int columnFromGUI_
Gets called when the data in the table has changed.
void loadIniFileOptionsLast(INIFile &_ini)
Load Groups from ini file.
int childCount() const
get the number of children
Definition: BaseObject.cc:511
const UpdateType UPDATE_ALL(UpdateTypeSet(1))
Identifier for all updates.
DefaultObjectMarker objectMarker
Default marker to visualize "source" and "target" object flags.
int onlyUp_
Gets called when the data in the table has changed.
void add_entry(const QString &_section, const QString &_key, const QString &_value)
Addition / modification of a string entry.
Definition: INIFile.cc:257
QHeaderView * viewHeader_
Pointer to the header to the view widget.
void slotContextMenuTarget()
Target Selection.
void slotCopyMaterialToTargeted()
Called by the popup menu to copy material properties.
Definition: Popup.cc:446
void objectDeleted(int _id)
an object was deleted. delete it internally
QAction * targetAction_
Hide an object.
QModelIndex parent(const QModelIndex &_index) const
Get the parent ModelIndex.
Definition: TreeModel.cc:312
void slotObjectPropertiesChanged(int _identifier)
Update the model if properties of an object changed.
bool getObject(const int _identifier, BaseObject *&_object)
Get the object which has the given identifier.
BaseObject *& objectRoot()
Get the root of the object structure.
bool target()
Definition: BaseObject.cc:273
const DataType DATA_GROUP(1)
Items used for Grouping.
bool get_entry(QString &_val, const QString &_section, const QString &_key) const
Access to a string entry.
Definition: INIFile.cc:433
DataControlPlugin()
Constructor.
void slotCopyMaterialToClipboard()
Called by the popup menu to copy material properties to clipboard.
Definition: Popup.cc:494
Draw node & children.
Definition: BaseNode.hh:392
void setAllTarget()
Makes all available objects target.
QAction * removeAction_
Hide an object.
int id() const
Definition: BaseObject.cc:190
void showReducedUi(bool reduced)
Show or hide the extended ui interface in the datacontrol toolbox.
void slotDataChanged(int _id, int _column, const QVariant &_value)
Gets called when the data in the table has changed.
TreeItem * getItem(const QModelIndex &_index) const
Get the TreeItem corresponding to a given ModelIndex.
Definition: TreeModel.cc:508
QAction * sourceAction_
Hide an object.
void slotHeaderCustomContextMenuRequested(const QPoint &_pos)
Display a custom context window for the TreeViews header.
Definition: Popup.cc:313
BaseObject * childExists(int _objectId)
Check if the element exists in the subtree of this element.
Definition: BaseObject.cc:516
bool dataType(DataType _type) const
Definition: BaseObject.cc:221
QToolButton * advancedSettingsBtn_
Hide an object.
void setDefaultViewObjectMarker(ViewObjectMarker *_marker)
std::vector< int > IdList
Standard Type for id Lists used for scripting.
Definition: DataTypes.hh:179
DLLEXPORT ObjectIterator objectsEnd()
Return Iterator to Object End.
TreeModel * model_
The Treemodel organizing the data.
QModelIndex index(int _row, int _column, const QModelIndex &_parent=QModelIndex()) const
Get the ModelIndex at given row,column.
Definition: TreeModel.cc:285
BaseObject * parent()
Get the parent item ( 0 if rootitem )
Definition: BaseObject.cc:466
QTreeView * view_
Tree view.
bool source()
source
Definition: TreeItem.cc:139
BoundingBoxNode * boundingBoxNode()
get a pointer to the bounding box node
void setParent(BaseObject *_parent)
Set the parent pointer.
Definition: BaseObject.cc:477
virtual void setName(QString _name)
path to the file from which the object is loaded ( defaults to "." )
Definition: BaseObject.cc:723
void setViewObjectMarker(ViewObjectMarker *_marker)
void slotMoveBaseObject(int _id, int _newParentId)
Gets called when an object was moved via drag n drop.
void slotContextMenuRemove()
Remove Selected Item.
void slotCustomContextMenuRequested(const QPoint &_pos)
Display a custom context window for the TreeView.
Definition: Popup.cc:179
Update type class.
Definition: UpdateType.hh:60
QString name()
Name of the Plugin.
void set_status(StatusMode _s)
Set the status of this node.
DatacontrolToolboxWidget * tool_
Widget for Toolbox.
void fileOpened(int _id)
Update the model if a file has been opened.
bool isGroup() const
Check if object is a group.
Definition: BaseObject.cc:619
void objectDeleted(int _id)
The object with the given id has been deleted. delete it from the internal tree.
Definition: TreeModel.cc:461
bool contains(const UpdateType &_type) const
Check if this update contains the given UpdateType.
Definition: UpdateType.cc:104
void slotContextMenuSource()
Source Selection.
int onlyDown_
Gets called when the data in the table has changed.
void objectChanged(int _id)
The object with the given id has been changed. Check if model also has to be changed.
Definition: TreeModel.cc:353
void slotShowLightSources()
Index where a popup has been opened.
void slotObjectsGrouped(IdList _lst)
update objects when they have been grouped
void slotContextMenuHide()
Hide an object.
Class for the handling of simple configuration files.
Definition: INIFile.hh:99
void set_base_color(const Vec4f &_c)
set the base color ( Same as set_emission(const Vec4f& _c) )
void saveOnExit(INIFile &_ini)
Save settings before application is closed.
virtual bool visible()
return if object is visible
Definition: BaseObject.cc:339
void slotObjectSelectionChanged(int _identifier)
update drawing of objects when the active object changed
int rowCount(const QModelIndex &_parent=QModelIndex()) const
get the number of rows
Definition: TreeModel.cc:334
void addedEmptyObject(int _id)
Update the model if an empty object has been added.
void slotMaterialProperties()
Called by the popup menu to set material properties.
Definition: Popup.cc:575
#define DATA_LIGHT
Definition: Light.hh:58
void objectAdded(BaseObject *_object)
The object with the given id has been added. add it to the internal tree.
Definition: TreeModel.cc:426
void propagateDownwards(BaseObject *_obj, int _column)
Recursively update a column up to the root of the tree.
bool section_exists(const QString &_section) const
Check if given section exists in the current INI file.
Definition: INIFile.cc:227
void updateBoundingBox(BaseObjectData *_obj)
Updates bounding box.
void slotPasteMaterialFromClipboard()
Called by the popup menu to paste material properties from clipboard.
Definition: Popup.cc:534
void pluginsInitialized()
Plugin initialization.
The Menu will be shown when an object was picked.
const DataType DATA_ALL(UINT_MAX)
Identifier for all available objects.
int addEmptyGroup(QString _groupName="", int _parentGroupId=0)
Create new empty group.
void slotPopupRemove()
Called by the popup menu to remove an object/group.
Definition: Popup.cc:62