Developer Documentation
VertexSelection.cc
1 /*===========================================================================*\
2  * *
3  * OpenFlipper *
4  * Copyright (c) 2001-2015, RWTH-Aachen University *
5  * Department of Computer Graphics and Multimedia *
6  * All rights reserved. *
7  * www.openflipper.org *
8  * *
9  *---------------------------------------------------------------------------*
10  * This file is part of OpenFlipper. *
11  *---------------------------------------------------------------------------*
12  * *
13  * Redistribution and use in source and binary forms, with or without *
14  * modification, are permitted provided that the following conditions *
15  * are met: *
16  * *
17  * 1. Redistributions of source code must retain the above copyright notice, *
18  * this list of conditions and the following disclaimer. *
19  * *
20  * 2. Redistributions in binary form must reproduce the above copyright *
21  * notice, this list of conditions and the following disclaimer in the *
22  * documentation and/or other materials provided with the distribution. *
23  * *
24  * 3. Neither the name of the copyright holder nor the names of its *
25  * contributors may be used to endorse or promote products derived from *
26  * this software without specific prior written permission. *
27  * *
28  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS *
29  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED *
30  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A *
31  * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER *
32  * OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, *
33  * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, *
34  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR *
35  * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF *
36  * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING *
37  * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS *
38  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *
39  * *
40 \*===========================================================================*/
41 
42 /*===========================================================================*\
43  * *
44  * $Revision$ *
45  * $Author$ *
46  * $Date$ *
47  * *
48 \*===========================================================================*/
49 
50 #include "MeshObjectSelectionPlugin.hh"
51 
53 
54 //=========================================================
55 //==== Vertex selections
56 //=========================================================
57 
58 void MeshObjectSelectionPlugin::selectVertices(int _objectId, IdList _vertexList) {
59 
60  if(_vertexList.empty() ) return;
61 
62  BaseObjectData* object = 0;
63  if (!PluginFunctions::getObject(_objectId,object)) {
64  emit log(LOGERR,tr("selectVertices: unable to get object"));
65  return;
66  }
67 
68  if (object->dataType() == DATA_TRIANGLE_MESH)
69  MeshSelection::selectVertices(PluginFunctions::triMesh(object), _vertexList);
70  else if (object->dataType() == DATA_POLY_MESH)
71  MeshSelection::selectVertices(PluginFunctions::polyMesh(object), _vertexList);
72  else {
73  emit log(LOGERR,tr("selectAllVertices: Unsupported object Type"));
74  return;
75  }
76 
77  QString selection = "selectVertices(ObjectId(" + QString::number(_objectId) + "), [ " + QString::number(_vertexList[0]);
78 
79  for (uint i = 1 ; i < _vertexList.size(); ++i) {
80  selection += ", " + QString::number(_vertexList[i]);
81  }
82 
83  selection += " ])";
84 
85  emit updatedObject(object->id(), UPDATE_SELECTION_VERTICES);
86  emit scriptInfo(selection);
87 }
88 
89 //=========================================================
90 
91 void MeshObjectSelectionPlugin::unselectVertices(int _objectId, IdList _vertexList) {
92 
93  if(_vertexList.empty() ) return;
94 
95  BaseObjectData* object = 0;
96  if (!PluginFunctions::getObject(_objectId,object)) {
97  emit log(LOGERR,tr("unselectVertices: unable to get object"));
98  return;
99  }
100 
101  if (object->dataType() == DATA_TRIANGLE_MESH)
102  MeshSelection::unselectVertices(PluginFunctions::triMesh(object), _vertexList);
103  else if (object->dataType() == DATA_POLY_MESH)
104  MeshSelection::unselectVertices(PluginFunctions::polyMesh(object), _vertexList);
105  else {
106  emit log(LOGERR,tr("unselectVertices: Unsupported object Type"));
107  return;
108  }
109 
110  QString selection = "unselectVertices(ObjectId(" + QString::number(_objectId) + "), [ " + QString::number(_vertexList[0]);
111 
112  for (uint i = 1 ; i < _vertexList.size(); ++i) {
113  selection += ", " + QString::number(_vertexList[i]);
114  }
115 
116  selection += " ])";
117 
118  emit updatedObject(object->id(), UPDATE_SELECTION_VERTICES);
119  emit scriptInfo(selection);
120 }
121 
122 
123 //=========================================================
124 
125 
127 
128  BaseObjectData* object;
129  if (!PluginFunctions::getObject(_objectId,object)) {
130  emit log(LOGERR,tr("selectAllVertices: unable to get object"));
131  return;
132  }
133 
134  if (object->dataType() == DATA_TRIANGLE_MESH)
135  MeshSelection::selectAllVertices(PluginFunctions::triMesh(object));
136  else if (object->dataType() == DATA_POLY_MESH)
137  MeshSelection::selectAllVertices(PluginFunctions::polyMesh(object));
138  else {
139  emit log(LOGERR,tr("selectAllVertices: Unsupported object Type"));
140  return;
141  }
142 
143  emit updatedObject(object->id(), UPDATE_SELECTION_VERTICES);
144  emit scriptInfo("selectAllVertices(ObjectId(" + QString::number(_objectId) + "))");
145 }
146 
147 //=========================================================
148 
150 
151  BaseObjectData* object;
152  if (!PluginFunctions::getObject(_objectId,object)) {
153  emit log(LOGERR,tr("clearVertexSelection: unable to get object"));
154  return;
155  }
156 
157  if (object->dataType() == DATA_TRIANGLE_MESH)
158  MeshSelection::clearVertexSelection(PluginFunctions::triMesh(object));
159  else if (object->dataType() == DATA_POLY_MESH)
160  MeshSelection::clearVertexSelection(PluginFunctions::polyMesh(object));
161  else {
162  emit log(LOGERR,tr("clearVertexSelection: Unsupported object Type"));
163  return;
164  }
165 
166  emit updatedObject(object->id(), UPDATE_SELECTION_VERTICES);
167  emit scriptInfo("clearVertexSelection(ObjectId(" + QString::number(_objectId) + "))");
168 }
169 
170 //=========================================================
171 
173 
174  BaseObjectData* object;
175  if (!PluginFunctions::getObject(_objectId,object)) {
176  emit log(LOGERR,tr("invertVertexSelection: unable to get object"));
177  return;
178  }
179 
180  if (object->dataType() == DATA_TRIANGLE_MESH)
181  MeshSelection::invertVertexSelection(PluginFunctions::triMesh(object));
182  else if (object->dataType() == DATA_POLY_MESH)
183  MeshSelection::invertVertexSelection(PluginFunctions::polyMesh(object));
184  else {
185  emit log(LOGERR,tr("invertVertexSelection: Unsupported object Type"));
186  return;
187  }
188 
189  emit updatedObject(object->id(), UPDATE_SELECTION_VERTICES);
190  emit scriptInfo("invertVertexSelection(ObjectId(" + QString::number(_objectId) + "))");
191 }
192 
193 //=========================================================
194 
196 
197  BaseObjectData* object;
198  if (!PluginFunctions::getObject(_objectId,object)) {
199  emit log(LOGERR,tr("selectBoundaryVertices: unable to get object"));
200  return;
201  }
202 
203  if (object->dataType() == DATA_TRIANGLE_MESH)
204  MeshSelection::selectBoundaryVertices(PluginFunctions::triMesh(object));
205  else if (object->dataType() == DATA_POLY_MESH)
206  MeshSelection::selectBoundaryVertices(PluginFunctions::polyMesh(object));
207  else {
208  emit log(LOGERR,tr("selectBoundaryVertices: Unsupported object Type"));
209  return;
210  }
211 
212  emit updatedObject(object->id(), UPDATE_SELECTION_VERTICES);
213  emit scriptInfo("selectBoundaryVertices(ObjectId(" + QString::number(_objectId) + "))");
214 }
215 
216 //=========================================================
217 
219 
220  BaseObjectData* object;
221  if (!PluginFunctions::getObject(_objectId,object)) {
222  emit log(LOGERR,tr("selectClosestBoundaryVertices: unable to get object"));
223  return;
224  }
225 
226  if (object->dataType() == DATA_TRIANGLE_MESH) {
228  } else if (object->dataType() == DATA_POLY_MESH) {
230  } else {
231  emit log(LOGERR,tr("selectClosestBoundaryVertices: Unsupported object Type"));
232  return;
233  }
234 
235  emit updatedObject(object->id(), UPDATE_SELECTION_VERTICES);
236  emit scriptInfo("selectClosestBoundaryVertices(ObjectId(" + QString::number(_objectId) + "), VertexId)");
237 }
238 
239 //=========================================================
240 
242 
243  BaseObjectData* object;
244  if (!PluginFunctions::getObject(_objectId,object)) {
245  emit log(LOGERR,tr("shrinkVertexSelection: unable to get object"));
246  return;
247  }
248 
249  if (object->dataType() == DATA_TRIANGLE_MESH)
250  MeshSelection::shrinkVertexSelection(PluginFunctions::triMesh(object));
251  else if (object->dataType() == DATA_POLY_MESH)
252  MeshSelection::shrinkVertexSelection(PluginFunctions::polyMesh(object));
253  else {
254  emit log(LOGERR,tr("shrinkVertexSelection: Unsupported object Type"));
255  return;
256  }
257 
258  emit updatedObject(object->id(), UPDATE_SELECTION_VERTICES);
259  emit scriptInfo("shrinkVertexSelection(ObjectId(" + QString::number(_objectId) + "))");
260 }
261 
262 //=========================================================
263 
265 
266  BaseObjectData* object;
267  if (!PluginFunctions::getObject(_objectId,object)) {
268  emit log(LOGERR,tr("growVertexSelection: unable to get object"));
269  return;
270  }
271 
272  if (object->dataType() == DATA_TRIANGLE_MESH)
273  MeshSelection::growVertexSelection(PluginFunctions::triMesh(object));
274  else if (object->dataType() == DATA_POLY_MESH)
275  MeshSelection::growVertexSelection(PluginFunctions::polyMesh(object));
276  else {
277  emit log(LOGERR,tr("growVertexSelection: Unsupported object Type"));
278  return;
279  }
280 
281  emit updatedObject(object->id(), UPDATE_SELECTION_VERTICES);
282  emit scriptInfo("growVertexSelection(ObjectId(" + QString::number(_objectId) + "))");
283 }
284 
285 //=========================================================
286 
288 
289  BaseObjectData* object;
290  if (!PluginFunctions::getObject(_objectId,object)) {
291  emit log(LOGERR,tr("getVertexSelection: unable to get object"));
292  return IdList(0);
293  }
294 
295  emit scriptInfo("getVertexSelection(ObjectId(" + QString::number(_objectId) + "))");
296 
297  if (object->dataType() == DATA_TRIANGLE_MESH)
298  return MeshSelection::getVertexSelection(PluginFunctions::triMesh(object));
299  else if (object->dataType() == DATA_POLY_MESH)
300  return MeshSelection::getVertexSelection(PluginFunctions::polyMesh(object));
301  else {
302  emit log(LOGERR,tr("getVertexSelection: Unsupported object Type"));
303  return IdList(0);
304  }
305 
306  return IdList(0);
307 }
308 
309 //=========================================================
310 
312 
313  BaseObjectData* object;
314  if (!PluginFunctions::getObject(_objectId,object)) {
315  emit log(LOGERR,tr("deleteVertexSelection: unable to get object"));
316  return;
317  }
318 
319  if (object->dataType() == DATA_TRIANGLE_MESH)
321  else if (object->dataType() == DATA_POLY_MESH)
323  else {
324  emit log(LOGERR,tr("deleteVertexSelection: Unsupported object Type"));
325  return;
326  }
327 
328  emit updatedObject(object->id(), UPDATE_ALL);
329  emit scriptInfo("deleteVertexSelection(ObjectId(" + QString::number(_objectId) + "))");
330 }
331 
332 //=========================================================
333 
335  return createMeshFromSelection(_objectId, vertexType_ );
336 }
337 
338 //=========================================================
339 
341 void MeshObjectSelectionPlugin::colorizeVertexSelection(int _objectId, int r, int g, int b, int a) {
342 
343  BaseObjectData* object;
344  if (!PluginFunctions::getObject(_objectId, object)) {
345  emit log(LOGERR,"colorizeVertexSelection: unable to get object");
346  return;
347  }
348 
349  if (object->dataType() == DATA_TRIANGLE_MESH) {
351  } else if (object->dataType() == DATA_POLY_MESH) {
353  } else {
354  emit log(LOGERR,"colorizeVertexSelection: Unsupported object Type");
355  return;
356  }
357 
358  emit scriptInfo("colorizeVertexSelection(ObjectId(" + QString::number(_objectId) + "), "
359  + QString::number(r) + ", " + QString::number(g) + ", " + QString::number(b) + ")");
360 
361  emit updatedObject(_objectId, UPDATE_COLOR);
362 }
363 
364 //=========================================================
365 //==== Modeling Area selections
366 //=========================================================
367 
368 void MeshObjectSelectionPlugin::selectHandleVertices(int _objectId, IdList _vertexList) {
369 
370  BaseObjectData* object;
371  if (!PluginFunctions::getObject(_objectId,object)) {
372  emit log(LOGERR,tr("selectHandleVertices: unable to get object"));
373  return;
374  }
375 
376  if (_vertexList.empty() )
377  return;
378 
379  if (object->dataType() == DATA_TRIANGLE_MESH){
380  MeshSelection::setArea(PluginFunctions::triMesh(object), _vertexList, HANDLEAREA, true);
382  } else if (object->dataType() == DATA_POLY_MESH){
383  MeshSelection::setArea(PluginFunctions::polyMesh(object), _vertexList, HANDLEAREA, true);
385  } else {
386  emit log(LOGERR,tr("selectHandleVertices: Unsupported object Type"));
387  return;
388  }
389 
390  QString selection = "selectHandleVertices(ObjectId(" + QString::number(_objectId) + "), [ " + QString::number(_vertexList[0]);
391 
392  for (uint i = 1 ; i < _vertexList.size(); ++i) {
393  selection += ", " + QString::number(_vertexList[i]);
394  }
395 
396  selection += " ])";
397 
398  emit updatedObject(object->id(), UPDATE_ALL);
399  emit scriptInfo(selection);
400 }
401 
402 //=========================================================
403 
405 
406  if(_vertexList.empty()) return;
407 
408  BaseObjectData* object = 0;
409  if (!PluginFunctions::getObject(_objectId,object)) {
410  emit log(LOGERR,tr("unselectHandleVertices: unable to get object"));
411  return;
412  }
413 
414  if (object->dataType() == DATA_TRIANGLE_MESH)
415  MeshSelection::setArea(PluginFunctions::triMesh(object), _vertexList, HANDLEAREA, false);
416  else if (object->dataType() == DATA_POLY_MESH)
417  MeshSelection::setArea(PluginFunctions::polyMesh(object), _vertexList, HANDLEAREA, false);
418  else {
419  emit log(LOGERR,tr("unselectHandleVertices: Unsupported object Type"));
420  return;
421  }
422 
423  QString selection = "unselectHandleVertices(ObjectId(" + QString::number(_objectId) + "), [ " + QString::number(_vertexList[0]);
424 
425  for (uint i = 1 ; i < _vertexList.size(); ++i) {
426  selection += ", " + QString::number(_vertexList[i]);
427  }
428 
429  selection += " ])";
430 
431  emit updatedObject(object->id(), UPDATE_ALL);
432  emit scriptInfo(selection);
433 }
434 
435 //=========================================================
436 
438 
439  BaseObjectData* object;
440  if (!PluginFunctions::getObject(_objectId,object)) {
441  emit log(LOGERR,tr("clearHandleVertices: unable to get object"));
442  return;
443  }
444 
445  if (object->dataType() == DATA_TRIANGLE_MESH)
446  MeshSelection::setArea(PluginFunctions::triMesh(object), HANDLEAREA, false);
447  else if (object->dataType() == DATA_POLY_MESH)
448  MeshSelection::setArea(PluginFunctions::polyMesh(object), HANDLEAREA, false);
449  else {
450  emit log(LOGERR,tr("clearHandleVertices: Unsupported object Type"));
451  return;
452  }
453 
454  emit updatedObject(object->id(), UPDATE_ALL);
455  emit scriptInfo("clearHandleVertices(ObjectId(" + QString::number(_objectId) + "))");
456 }
457 
458 //=========================================================
459 
461 
462  BaseObjectData* object;
463  if (!PluginFunctions::getObject(_objectId,object)) {
464  emit log(LOGERR,tr("setAllHandleVertices: unable to get object"));
465  return;
466  }
467 
468  if (object->dataType() == DATA_TRIANGLE_MESH)
469  MeshSelection::setArea(PluginFunctions::triMesh(object), HANDLEAREA, true);
470  else if (object->dataType() == DATA_POLY_MESH)
471  MeshSelection::setArea(PluginFunctions::polyMesh(object), HANDLEAREA, true);
472  else {
473  emit log(LOGERR,tr("setAllHandleVertices: Unsupported object Type"));
474  return;
475  }
476 
477  emit updatedObject(object->id(), UPDATE_ALL);
478  emit scriptInfo("setAllHandleVertices(ObjectId(" + QString::number(_objectId) + "))");
479 }
480 
481 //=========================================================
482 
484 
485  BaseObjectData* object;
486  if (!PluginFunctions::getObject(_objectId,object)) {
487  emit log(LOGERR,tr("getHandleVertices: unable to get object"));
488  return IdList(0);
489  }
490 
491  emit scriptInfo("getHandleVertices(ObjectId(" + QString::number(_objectId) + "))");
492 
493  if (object->dataType() == DATA_TRIANGLE_MESH)
494  return MeshSelection::getArea(PluginFunctions::triMesh(object), HANDLEAREA);
495  else if (object->dataType() == DATA_POLY_MESH)
496  return MeshSelection::getArea(PluginFunctions::polyMesh(object), HANDLEAREA);
497  else {
498  emit log(LOGERR,tr("getHandleVertices: Unsupported object Type"));
499  return IdList(0);;
500  }
501 
502  return IdList(0);
503 }
504 
505 //=========================================================
506 //==== Modeling Area selections
507 //=========================================================
508 
510 
511  if(_vertexList.empty() ) return;
512 
513  BaseObjectData* object = 0;
514  if (!PluginFunctions::getObject(_objectId,object)) {
515  emit log(LOGERR,tr("selectModelingVertices: unable to get object"));
516  return;
517  }
518 
519  if (object->dataType() == DATA_TRIANGLE_MESH) {
520  MeshSelection::setArea(PluginFunctions::triMesh(object), _vertexList, AREA, true);
522  } else if (object->dataType() == DATA_POLY_MESH){
523  MeshSelection::setArea(PluginFunctions::polyMesh(object), _vertexList, AREA, true);
525  } else {
526  emit log(LOGERR,tr("selectModelingVertices: Unsupported object Type"));
527  return;
528  }
529 
530  QString selection = "selectModelingVertices(ObjectId(" + QString::number(_objectId) + "), [ " + QString::number(_vertexList[0]);
531 
532  for (uint i = 1 ; i < _vertexList.size(); ++i) {
533  selection += ", " + QString::number(_vertexList[i]);
534  }
535 
536  selection += " ])";
537 
538  emit updatedObject(object->id(), UPDATE_ALL);
539  emit scriptInfo(selection);
540 }
541 
542 //=========================================================
543 
545 
546  if(_vertexList.empty() ) return;
547 
548  BaseObjectData* object = 0;
549  if (!PluginFunctions::getObject(_objectId,object)) {
550  emit log(LOGERR,tr("unselectModelingVertices: unable to get object"));
551  return;
552  }
553 
554  if (object->dataType() == DATA_TRIANGLE_MESH)
555  MeshSelection::setArea(PluginFunctions::triMesh(object), _vertexList, AREA, false);
556  else if (object->dataType() == DATA_POLY_MESH)
557  MeshSelection::setArea(PluginFunctions::polyMesh(object), _vertexList, AREA, false);
558  else{
559  emit log(LOGERR,tr("unselectModelingVertices: Unsupported object Type"));
560  return;
561  }
562 
563  QString selection = "unselectModelingVertices(ObjectId(" + QString::number(_objectId) + "), [ " + QString::number(_vertexList[0]);
564 
565  for (uint i = 1 ; i < _vertexList.size(); ++i) {
566  selection += ", " + QString::number(_vertexList[i]);
567  }
568 
569  selection += " ])";
570 
571  emit updatedObject(object->id(), UPDATE_ALL);
572  emit scriptInfo(selection);
573 }
574 
575 // =========================================================
576 
577 void MeshObjectSelectionPlugin::selectVerticesByValue(int _objectId, QString _component, bool _greater, double _value ) {
578  BaseObjectData* object = 0;
579  if (!PluginFunctions::getObject(_objectId,object)) {
580  emit log(LOGERR,tr("selectVerticesByValue: unable to get object"));
581  return;
582  }
583 
584  if (object->dataType() == DATA_TRIANGLE_MESH)
585  selectVerticesByValue(PluginFunctions::triMesh(object), _component, _greater, _value);
586  else if (object->dataType() == DATA_POLY_MESH)
587  selectVerticesByValue(PluginFunctions::polyMesh(object), _component, _greater, _value);
588  else{
589  emit log(LOGERR,tr("selectVerticesByValue: Unsupported object Type"));
590  return;
591  }
592 
593  emit updatedObject(object->id(), UPDATE_SELECTION);
594 
596 
597 }
598 
599 
600 //=========================================================
601 
603 
604  BaseObjectData* object;
605  if (!PluginFunctions::getObject(_objectId,object)) {
606  emit log(LOGERR,tr("clearModelingVertices: unable to get object"));
607  return;
608  }
609 
610  if (object->dataType() == DATA_TRIANGLE_MESH)
611  MeshSelection::setArea(PluginFunctions::triMesh(object), AREA, false);
612  else if (object->dataType() == DATA_POLY_MESH)
613  MeshSelection::setArea(PluginFunctions::polyMesh(object), AREA, false);
614  else{
615  emit log(LOGERR,tr("clearModelingVertices: Unsupported object Type"));
616  return;
617  }
618 
619  emit updatedObject(object->id(), UPDATE_ALL);
620  emit scriptInfo("clearModelingVertices(ObjectId(" + QString::number(_objectId) + "))");
621 }
622 
623 //=========================================================
624 
626 
627  BaseObjectData* object;
628  if (!PluginFunctions::getObject(_objectId,object)) {
629  emit log(LOGERR,tr("setAllModelingVertices: unable to get object"));
630  return;
631  }
632 
633  if (object->dataType() == DATA_TRIANGLE_MESH)
634  MeshSelection::setArea(PluginFunctions::triMesh(object), AREA, true);
635  else if (object->dataType() == DATA_POLY_MESH)
636  MeshSelection::setArea(PluginFunctions::polyMesh(object), AREA, true);
637  else{
638  emit log(LOGERR,tr("setAllModelingVertices: Unsupported object Type"));
639  return;
640  }
641 
642  emit updatedObject(object->id(), UPDATE_ALL);
643  emit scriptInfo("setAllModelingVertices(ObjectId(" + QString::number(_objectId) + "))");
644 }
645 
646 //=========================================================
648  BaseObjectData* object;
649  if (!PluginFunctions::getObject(_objectId,object)) {
650  emit log(LOGERR,tr("getModelingVertices: unable to get object"));
651  return IdList(0);
652  }
653 
654  emit scriptInfo("getModelingVertices(ObjectId(" + QString::number(_objectId) + "))");
655 
656  if (object->dataType() == DATA_TRIANGLE_MESH)
657  return MeshSelection::getArea(PluginFunctions::triMesh(object), AREA);
658  else if (object->dataType() == DATA_POLY_MESH)
659  return MeshSelection::getArea(PluginFunctions::polyMesh(object), AREA);
660  else{
661  emit log(LOGERR,tr("getModelingVertices: Unsupported object Type"));
662  return IdList(0);
663  }
664 
665  return IdList(0);
666 }
667 
668 //=========================================================
669 
670 void MeshObjectSelectionPlugin::loadFlipperModelingSelection(int _objectId, QString _filename) {
671 
672  QFile file(_filename);
673 
674  if (!file.exists()) {
675  emit log(LOGERR,tr("Unable to find file: ") + _filename);
676  return;
677  }
678 
679  if (file.open(QFile::ReadOnly)) {
680 
681  QTextStream input(&file);
682  QString header = input.readLine();
683 
684  if (!header.contains("Selection")) {
685  emit log(LOGERR,tr("Wrong file header!should be Selection but is ") + header);
686  return;
687  }
688 
689  header = input.readLine();
690 
691  bool ok = false;
692  uint vertexCount = header.toUInt(&ok);
693 
694  if (!ok) {
695  emit log(LOGERR,tr("Unable to parse header. Cant get vertex count from string: ") + header);
696  return;
697  }
698 
699  //compare VertexCount
700  BaseObjectData* object;
701  if (!PluginFunctions::getObject(_objectId, object)) {
702  emit log(LOGERR,tr("loadSelection: unable to get object"));
703  return;
704  }
705 
706  if (object->dataType() == DATA_TRIANGLE_MESH) {
707  if (PluginFunctions::triMesh(object)->n_vertices() != vertexCount)
708  return;
709  } else if (object->dataType() == DATA_POLY_MESH) {
710  if (PluginFunctions::polyMesh(object)->n_vertices() != vertexCount)
711  return;
712  } else {
713  return;
714  }
715 
716  //get selected handles
717  IdList handleVertices;
718  IdList modelingVertices;
719 
720  uint vertexId = 0;
721 
722  do {
723  // Split into two substrings
724  QStringList inputList = input.readLine().split(" ");
725 
726  if (inputList.size() != 2) {
727  emit log(LOGERR,tr("Unable to parse entry at vertex index ") + QString::number(vertexId));
728  return;
729  }
730 
731  if (inputList[0] == "1")
732  modelingVertices.push_back(vertexId);
733 
734  if (inputList[1] == "1")
735  handleVertices.push_back(vertexId);
736 
737  ++vertexId;
738 
739  } while (!input.atEnd());
740 
741  clearModelingVertices(_objectId);
742  selectModelingVertices(_objectId,modelingVertices);
743 
744  clearHandleVertices(_objectId);
745  selectHandleVertices(_objectId,handleVertices);
746 
747  } else {
748  emit log(LOGERR,tr("Unable to open selection file!"));
749  }
750 }
751 
752 //=========================================================
753 
754 void MeshObjectSelectionPlugin::saveFlipperModelingSelection(int _objectId, QString _filename) {
755 
756  QFile file(_filename);
757 
758  if (file.open(QFile::WriteOnly)) {
759  QTextStream input(&file);
760 
761  //get the object
762  BaseObjectData* object;
763  if (!PluginFunctions::getObject(_objectId,object)) {
764  emit log(LOGERR,tr("saveFlipperModelingSelection: unable to get object"));
765  return;
766  }
767 
768  if (object->dataType() == DATA_TRIANGLE_MESH) {
769  TriMesh* mesh = PluginFunctions::triMesh(object);
770 
771  //header
772  input << "Selection" << endl;
773  input << mesh->n_vertices() << endl;
774 
775  std::vector< int > modelingVertices = MeshSelection::getArea(mesh, AREA);
776  std::vector< int > handleVertices = MeshSelection::getArea(mesh, HANDLEAREA);
777 
778  std::vector< bool > modelingAll(mesh->n_vertices(), false);
779  std::vector< bool > handleAll(mesh->n_vertices(), false);
780 
781  for (uint i=0; i < modelingVertices.size(); i++)
782  modelingAll[ modelingVertices[i] ] = true;
783 
784  for (uint i=0; i < handleVertices.size(); i++)
785  handleAll[ handleVertices[i] ] = true;
786 
787  for (uint i=0; i < mesh->n_vertices(); i++)
788  input << (int) modelingAll[i] << " " << (int) handleAll[i] << endl;
789 
790  } else if (object->dataType() == DATA_POLY_MESH){
791 
792  PolyMesh* mesh = PluginFunctions::polyMesh(object);
793 
794  //header
795  input << "Selection" << endl;
796  input << mesh->n_vertices() << endl;
797 
798  std::vector< int > modelingVertices = MeshSelection::getArea(mesh, AREA);
799  std::vector< int > handleVertices = MeshSelection::getArea(mesh, HANDLEAREA);
800 
801  std::vector< bool > modelingAll(mesh->n_vertices(), false);
802  std::vector< bool > handleAll(mesh->n_vertices(), false);
803 
804  for (uint i=0; i < modelingVertices.size(); i++)
805  modelingAll[ modelingVertices[i] ] = true;
806 
807  for (uint i=0; i < handleVertices.size(); i++)
808  handleAll[ handleVertices[i] ] = true;
809 
810  for (uint i=0; i < mesh->n_vertices(); i++)
811  input << (int) modelingAll[i] << " " << (int) handleAll[i] << endl;
812 
813  } else {
814  emit log(LOGERR, tr("saveFlipperModelingSelection: Unsupported Type."));
815  }
816  } else {
817  emit log(LOGERR,tr("Unable to open selection file!"));
818  }
819 }
IdList getModelingVertices(int objectId)
Get a list of all modeling vertices.
const UpdateType UPDATE_SELECTION_VERTICES(UpdateTypeSet(1)<< 5)
Vertex selection has changed.
void update_regions(MeshT *_mesh)
Update face selection to correspond to the vertex selection.
const UpdateType UPDATE_ALL(UpdateTypeSet(1))
Identifier for all updates.
void setAllModelingVertices(int objectId)
Set all vertices to be part of the modeling area.
void saveFlipperModelingSelection(int _objectId, QString _filename)
Save a selection in Flipper Selection Format.
#define DATA_POLY_MESH
Definition: PolyMesh.hh:59
SelectionInterface::PrimitiveType vertexType_
Primitive type handles:
int id() const
Definition: BaseObject.cc:190
const UpdateType UPDATE_SELECTION(UpdateTypeSet(1)<< 4)
Selection updated.
void createMeshFromSelection(MeshT &_mesh, MeshT &_newMesh, PrimitiveType _primitiveType)
Create a new mesh from the selection.
void unselectVertices(int objectId, IdList _vertexList)
unselect given vertices
void selectClosestBoundaryVertices(int _objectId, int _vertexId)
Select all vertices of the boundary close to the given vertex.
bool dataType(DataType _type) const
Definition: BaseObject.cc:221
bool deleteSelection(MeshT *_mesh, PrimitiveType _primitiveType)
Delete all selected elements of a mesh.
void colorizeVertexSelection(int _objectId, int _r, int _g, int _b, int a)
Colorize the vertex selection.
void colorizeSelection(MeshT *_mesh, PrimitiveType _primitiveTypes, int _red, int _green, int _blue, int _alpha)
Colorize the selection.
void clearModelingVertices(int objectId)
Clear Modeling Area.
TriMesh * triMesh(BaseObjectData *_object)
Get a triangle mesh from an object.
void selectBoundaryVertices(int _objectId)
Select all boundary vertices of the given object.
void selectVerticesByValue(int _objectId, QString _component, bool _greater, double _value)
Select vertices by their value.
int createMeshFromVertexSelection(int _objectId)
set dihedral angle threshold for edge selection
void selectAllVertices(int _objectId)
Select all Vertices.
void closestBoundarySelection(MeshT *_mesh, int _vh, PrimitiveType _primitiveTypes, bool _deselection)
Select all entities that are incident to closest boundary.
void selectHandleVertices(int objectId, IdList _vertexList)
Set vertices to be part of the handle area.
bool getObject(const int _identifier, BaseObject *&_object)
Get the object which has the given identifier.
void selectModelingVertices(int objectId, IdList _vertexList)
Set vertices to be part of the modeling area.
void unselectHandleVertices(int objectId, IdList _vertexList)
Remove vertices from handle area.
void setAllHandleVertices(int objectId)
Set all vertices to be part of the handle area.
std::vector< int > IdList
Standard Type for id Lists used for scripting.
Definition: DataTypes.hh:179
void clearVertexSelection(int _objectId)
Unselect all vertices.
Functions for selection on a mesh.
void invertVertexSelection(int _objectId)
Invert the current vertex selection.
IdList getHandleVertices(int objectId)
Get a list of all handle vertices.
IdList getVertexSelection(int _objectId)
Return a list of all selected vertices.
PolyMesh * polyMesh(BaseObjectData *_object)
Get a poly mesh from an object.
void growVertexSelection(int _objectId)
Grow the current vertex selection.
void loadFlipperModelingSelection(int _objectId, QString _filename)
Load a selection from an Flipper selection file for the given object.
void clearHandleVertices(int objectId)
Clear handle Area.
void deleteVertexSelection(int _objectId)
Delete vertices and faces that are currently selected.
#define DATA_TRIANGLE_MESH
Definition: TriangleMesh.hh:60
const UpdateType UPDATE_COLOR(UpdateTypeSet(1)<< 10)
Colors have changed.
void shrinkVertexSelection(int _objectId)
Shrink the current vertex selection.
void unselectModelingVertices(int objectId, IdList _vertexList)
Remove vertices from modeling area.
void selectVertices(int objectId, IdList _vertexList)
select given vertices